First locate the drain trap under your sink. Remove the old drain pipe.

Installing A Bathroom Sink Wall Hung Sink Diy Plumbing

Scrape out any blockage from.

Removing a sink trap. The first and foremost step is that the water supply should be completely closed off to avoid clogging up the sink. Cut through the clog. Step 2 removing the p trap.

If the clog remains you will now disassemble the drain trap under the sink. Step 1 close water supply. Place a bucket or other container under the trap to catch water.

For more stubborn clogs you may need to remove your sink trap to clean it properly. How to remove a sink trap. Begin by sponging out as much of the water in the sink as you can.

Step 3 empty all contents of p trap. 2 place a pair of slip joint pliers onto the slip. Unscrew the slip joint nuts on each side of the j section.

How to remove a bathroom sink p trap turn off the water to the sink faucet. Be sure to put a bucket under the pipe before removing it. Add a t fitting if necessary.

How to remove a sink drain p trap. Some water will leak out of the trap as you remove it so this will prevent water damage to the lower cabinetry. Mark the end of the trap that connects to the sink drain.

The large threaded coupling on pvc plastic traps can often be unscrewed by hand. Learn how to clean out the trap and get things moving again step 1. My first line of defense for unclogging a stopped up drain is to check the p trap the elbow shaped pipe under the sink.

Place a bucket underneath the trap. Connect trap bend to the trap arm. Remove the sink trap with a pipe wrench.

Hair soap residue grease food and oil are all known to clog sink traps and drain pipes. Place a bucket under the trap before taking it apart. Got a clogged sink.

Examine the parts of the drain. Bail the sink if it is clogged. Empty the water from the trap into a bucket then make sure the trap isn t clogged.

Unscrew the metal slip nuts a half turn or so so that you can finish loosening them by hand. To clear the clog you will need to clean your sink trap. Orient the cleaned trap so the marked end.

Clean gunk from the p trap with a bottle brush and clean water. Place a bucket or dish pan under the trap to catch any water that might come out as. Attach the trap arm.

This way you catch any debris or water that falls out when the trap is removed. For mild clogs use a plunger or a baking soda solution to clean your sink trap and remove the clog. Put on the rubber gloves.