Internet Scholar

Carefully remove the wheel hub s dust cap with a chisel and hammer. Next use your trailer wheel chocks to lock tires on the opposite side.

Bearing Down Repacking Rv Wheel Bearings Camper Repair Camper

How to replace front wheel bearings rotors brake pads on 97 2003 2wd ford f 150 expedition rwd 2x4 duration.

How to repack bearings. The first step is to jack up the wheel to work on. If you jack the trailer up and put a jack stand beneath it you can tell if you need to repack your bearing by attempting to shake the wheel up and down and side to side. Buying quality wheel bearings step 1.

When repacking the bearings you will do one wheel at a time. How can i tell if i need to repack it. Contact the vehicle manufacturer s parts division.

Look for symptoms indicating the wheel bearings need to be replaced. Greasing wheel bearings isn t the most enjoyable way to spend your free time. Make sure replacement parts are for exact year make and model.

Push the grease into the bearings working from the wide side of the bearing. Before you begin this project always consult your trailer s service manual or contact. Keep pushing the grease into the roller until the cage and rollers are filled.

I find it easiest to simply stick my floor jack under the axle and jack it up. Next coat the inside of the hub with grease. Repacking a bearing is the process of removing the parts of the wheel to access clean and add more grease to the bearing.

All things electro mechanical jeeps outdoors 26 477 views. 3 slide the outer bearing with the washer in front of it off the spindle. How to repack your wheel bearings 1 jack up the car and remove a wheel.

5 clean the outer bearings thoroughly in solvent or kerosene with. Use jack stands for safety. 4 check the grease in the spaces between the bearings.

Part 2 of 3. Over time grease breaks down. You could use one of those nifty drive on trailer wheel jacks if you have one for use with a tandem axle trailer.

However this messy maintenance saves you from bigger bills later. How to repack your own wheel bearings step 1. Tap the seal back onto the rear of the hub with a block of wood and hammer and install the hub and bearings back on the spindle.