Internet Scholar

Adjust the truss rod on a bass guitar by looking down the neck at the frets and using an allan wrench. Guitar truss rod adjustment guide this article provides a top level view of how a truss rod works and how to adjust a truss rod.

How To Do An Acoustic Guitar Truss Rod Adjustment Guitar

You may find the strings to be in the way of turning the truss rod.

Bass guitar truss rod adjustment. Fortunately you can easily adjust the truss rod with an allen wrench to move the neck back in line so your bass can continue to produce quality sound. Use the correct size hex key so you don t strip the truss rod nut. Before you do anything to your truss rod you need to have a reasonably good understanding of truss rods.

Your bass may have come with the hex key you need. Understanding your truss rod. Now start tightening the truss rod by turning it to the right righty tighty.

If the neck is too concave action too high turn the truss rod nut clockwise to remove excess relief. If the neck needs more relief you will turn the truss rod nut counterclockwise. Learn how from our expert bass guitar repair specialist in this free instrument maintenance.

Cody arsenault of musicians tuts explains how to fix an upbow and backbow in a guitar s neck by making some simple diy truss rod adjustments. If the curvature of your bass neck is not correct you need to adjust the truss rod. If the gap is too large insert the allen wrench or phillips screwdriver into the screw located either on the headstock or at the other end of the neck and then tighten the truss rod by turning the screw clockwise.

Use an appropriately sized allen wrench to adjust the truss rod. To adjust the action turn the screw in the truss rod to change the curvature of the neck. If the neck needs less relief you will tighten the truss rod by turning the truss rod nut clockwise.

How to adjust the truss rod on a bass guitar press the e string down at the first fret with your left hand and hold it. If the neck is too convex strings too close to the fingerboard turn the truss rod nut counter clockwise to allow the string tension to pull more relief into the neck. Adjusting a guitar truss rod is a key part of maintaining optimal playability.

Press the e string down at the last fret with your right hand. Over time the wooden neck of your bass will bend or straighten slightly because of factors like the constant pull of the strings and changes in temperature and humidity. Sight down the edge of the fingerboard from behind the headstock looking toward the body of the instrument.

To avoid breaking the truss rod first loosen it by turning it to the left lefty loosey. Adjustment at headstock allen wrench.